Page 1 of 3

Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 12:14 pm
by CrumbReaper
started another and will be step by step updating the WIP just to keep me motivated, not convinced this is the best
choice for a "my first figure sculpt" but I'm going for it anyway #notquiterightinthehead

the rough out of the body shape and cut into 3 portions

Image

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 3:08 pm
by Ace From Outer Space
Oh yes indeedy! Good luck you mad thing you, this should be good! :)

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 4:39 pm
by CrumbReaper
Ace From Outer Space wrote:Oh yes indeedy! Good luck you mad thing you, this should be good! :)



Thanks, been nagging myself for ages to try a figure, thought I'd better "go large" for the first one rather
than sculpting a humanoid......... the very thought is daunting!!

I've got the 3 body sections first coated with a mix of Greenstuff and Aves Apoxie, as I've put this on the main body
section has got little blisters appeared - anyone know what might have caused it just so I know for future?

Only seems to have occured on the larger torso, none on the head or tail..........

Image

Image

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 6:01 pm
by Ace From Outer Space
Its actually really inspiring to see matey. And the update with all the added green stuff goodness is awesome, I really like this! :froth:

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 6:46 pm
by ---
Don't dragons take 7 years to make? 0;)

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 6:51 pm
by CrumbReaper
Ace From Outer Space wrote:Its actually really inspiring to see matey. And the update with all the added green stuff goodness is awesome, I really like this! :froth:



Thanks Ace, I hope I can continue as I started and not fizzle out, feedback much appreciated - keeps the motivation tank full 8)

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 8:20 pm
by geronimo
Bubbles are probably from trapped air in the foam core.... you mad fucker :)

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 9:25 pm
by CrumbReaper
geronimo wrote:Bubbles are probably from trapped air in the foam core.... you mad fucker :)


nice one - and guilty as charged - would that affect mold making before I go any further with it? (you know - just in case!!)

I can probably make a stronger core shape from some bath panel like I did with the Tree of Doom.........

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 9:30 pm
by CrumbReaper
Dags wrote:Don't dragons take 7 years to make? 0;)


My heart goes out to Andy on that project. The dragon looks amazing though, I re-read the blog on it
before starting this yesterday, just to focus my brain and take onboard what Andy says about lessons
learned etc....... I think my dragon is a lot less ambitious, so fingers crossed!! 8)

Re: Rough the Magic Dragon

PostPosted: Sun Mar 27, 2016 9:38 pm
by CrumbReaper
also a quick test fit on the socket system for the Tree of Doooom

Image

images taken all the way around in the gallery

http://postimg.org/gallery/2htgtzkxq/